VOLVO
ECM-P126300 - Cylinder 3 High To Low Side Short. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
This code applies to cylinder 3. The engine control module (ECM) supplies the injectors from two integrated high-power output stages. The code is set when the module detects a faulty signal to the cylinder 3 injector while the engine is running. It gives no further fault type and can be a knock-on fault from another injector or fuel system circuit.
Mögliche Ursachen
- Knock-on fault from a fault detected by another trouble code test for the injectors and/or fuel system
- Damaged injector
Was Sie tun können
- 1Check the fuses first: confirm they are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Check whether there are other codes for the injectors or fuel system, and deal with those first.
- 3If you have a diagnostic tool, listen for a click when the cylinder 3 injector is activated, and compare with the other cylinders.
- 4Inspect the connector to the cylinder 3 injector and check that it is secure and free from corrosion.
- 5If the fault remains, have a workshop check the cylinder 3 injector with diagnostic equipment.
Symptome, die Sie bemerken können3
- The Check engine (malfunction) lamp comes on or behaves abnormally
- Text message and warning symbol in the display
- Poor performance, the car lacks power
Was der Fehler beeinflussen kann2
- Engine output and speed may be limited
- Soot particles are not burned off as normal
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.