VOLVO
ECM-P129501 - Injector Multiple Faults - Bank 1. General Failure Information. General electrical failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
This code covers several faults on the injectors in bank 1. The engine control module sets it when it detects a faulty signal to the injectors. It gives no further fault type. The cause is a short circuit or an open circuit in the wiring to the injectors, and when the code is set, injection stops.
Mögliche Ursachen
- Short circuit or open circuit in the wiring to the injectors
Was Sie tun können
- 1Check that the fuses are intact.
- 2Check the connectors to the injectors in bank 1. Any that are loose or corroded should be dealt with.
- 3If you have a diagnostic tool, activate the injectors in bank 1 one at a time and listen for each valve to click.
- 4Check the wiring to the injectors in bank 1 for open circuits and short circuits with a multimeter, with the ignition off.
- 5If the fault returns, have a workshop with diagnostic equipment check the injectors and their wiring.
Symptome, die Sie bemerken können4
- The engine does not start
- The engine does not turn over, or turns over but does not start
- Poor performance, the car lacks power
- The engine stalls
Was der Fehler beeinflussen kann1
- Injection stops
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.