VOLVO
ECM-P129513 - Injector Multiple Faults - Bank 1. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module finds that the signal to the injectors in bank 1 is missing and sets the code. This can be caused by an open circuit in the wiring to the injectors, by damaged injectors, or by an internal fault in the module.
Mögliche Ursachen
- Open circuit in the wiring to the injectors
- Damaged injectors
- Internal fault inside the ECM
Was Sie tun können
- 1Check that the fuses are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Check that the connectors to the injectors in bank 1 are secure and not corroded.
- 3Look for broken or chafed wires to the injectors in bank 1.
- 4Use a multimeter to check that the wiring to the injectors in bank 1 has no break, with the ignition off.
- 5If the fault returns, have a workshop with diagnostic equipment check the injectors and the control module.
Symptome, die Sie bemerken können4
- The engine does not start, and when the fault shows is unclear
- Poor performance, the car lacks power
- The engine stalls
- The engine does not turn over, with or without a clicking sound at a start attempt
Was der Fehler beeinflussen kann1
- Injection stops
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.