VOLVO
ECM-P129613 - Injector Multiple Faults - Bank 2. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The code is set when the signal to the injectors in bank 2 is absent. This can be caused by an open circuit in the wiring to the injectors, by damaged injectors, or by an internal fault in the control module.
Mögliche Ursachen
- Open circuit in the wiring to the injectors
- Damaged injectors
- Internal fault inside the ECM
Was Sie tun können
- 1Check that the fuses are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Check the connectors to the injectors in bank 2 so they are secure and clean.
- 3Look for broken or pinched wires to the injectors in bank 2.
- 4With the ignition off, use a multimeter to check that the wire to the injectors in bank 2 is not broken.
- 5If the fault comes back, have a workshop check the injectors in bank 2 and the control module with diagnostic equipment.
Symptome, die Sie bemerken können1
- The engine does not start, and when the fault shows is unclear
Was der Fehler beeinflussen kann1
- Injection stops
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.