Was bedeutet der Fehlercode ECM-P130328?

Diagnose und Fehlercodedefinition für ECM-P130328 (Volvo C30 (2007–2013), Volvo S40 (2004–2013), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P130328 - Exhaust Gas Recirculation Calibration Fault. General Signal Failures. Signal bias level out of range / zero adjustment failure

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

9 Modelle

C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

Modelle nach Baujahr und Motor anzeigen (9)

Was bedeutet der Fehlercode?

The code concerns the exhaust gas recirculation (EGR) system. The engine control module checks the learned limits of the EGR valve for closed and open positions and sets the code when the limit for the closed valve is outside what is permitted. The code can also be stored during a software update.

Mögliche Ursachen

The code can be stored during a software update and should then be deleted without further troubleshooting
The EGR valve sticks, for example due to dirt or soot
Damaged EGR valve

Was Sie tun können

1If the code was set during a software update, delete it without further fault-finding or action.
2Read the DTC counter: if the code was set once and later drive cycles show no fault, the software update is most likely the cause.
3Check that the EGR valve is not sticking from dirt or soot. If you have a diagnostic tool, you can activate the valve and see that it moves.
4If none of this helps, have a workshop with diagnostic equipment check the EGR valve. If it is damaged, it needs replacing.

Symptome, die Sie bemerken können1

No noticeable symptoms for the driver

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.