VOLVO
ECM-P133600 - Crankshaft/Camshaft Sensor Range/Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
Was bedeutet der Fehlercode?
The pulse sensor gives the engine control module (ECM) information about crankshaft rotation and how many teeth pass the sensor. The module uses the signal to calculate engine speed. The code is set when the ECM receives an incorrect number of crankshaft teeth per revolution, or when the sensor does not see the gap where teeth are missing on the crankshaft.
Mögliche Ursachen
- Contact resistance and oxidation in the connections
- Pulse sensor fitted incorrectly
- Damaged pulse sensor
- Contact resistance or oxidation in the pulse sensor connector
- Damage to the flywheel or carrier plate
Was Sie tun können
- 1Check that the fuses are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Check the pulse sensor connector and connections. They should be secure and free from oxide and corrosion.
- 3Check that the pulse sensor is fitted firmly and in the correct position.
- 4Look for high-current cables, such as the starter motor cable, that lie too close to the pulse sensor or its wiring and can disturb the signal.
- 5Have a workshop check the flywheel reference holes, as damage there can also cause the fault.
Symptome, die Sie bemerken können5
- The Check engine (malfunction) lamp comes on or behaves abnormally
- Poor performance, the car lacks power, especially when pulling away from a standstill
- The engine hesitates, surges or runs unevenly, at unclear times
- The engine does not start, and when the fault shows is unclear
- Text message and warning symbol in the display
Was der Fehler beeinflussen kann1
- The maximum engine speed is limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.