Was bedeutet der Fehlercode ECM-P133668?

Diagnose und Fehlercodedefinition für ECM-P133668 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S80 (2007–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P133668 - Crankshaft/Camshaft Sensor Range/Performance. Algorithm Based Failures. Event information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (12)

Was bedeutet der Fehlercode?

This is an event-controlled information code. It does not indicate a fault in the engine control module but is intended as information, and it disappears by itself when the conditions no longer apply. The module verifies the camshaft's position against the crankshaft's position. The fault can be due to a camshaft set incorrectly after a timing belt change, a camshaft fitted wrongly, or a damaged camshaft.

Mögliche Ursachen

Incorrectly adjusted camshaft after timing belt replacement
Incorrectly installed camshaft
Damaged camshaft

Was Sie tun können

1This is a knock-on fault. Deal with any other fault codes first.
2If the timing belt was recently replaced, the camshaft position may be wrong. Have a workshop check it.
3The code does not need clearing in advance. It disappears when the conditions no longer apply.
4If the code is still present once the other faults are dealt with, have a workshop check the camshaft.

Symptome, die Sie bemerken können1

No noticeable symptoms for the driver

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.