VOLVO
ECM-P133676 - Crankshaft/Camshaft Sensor Range/Performance. Mechanical Failures. Wrong mounting position
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The code concerns the position of the exhaust camshaft relative to the crankshaft. The engine control module (ECM) compares the camshaft position with the crankshaft position and sets the code when the camshaft is incorrectly adjusted after a timing belt change. The fault shows up at start attempts.
Mögliche Ursachen
- Incorrectly adjusted camshaft after timing belt replacement
- Incorrectly installed camshaft
- Damaged camshaft
Was Sie tun können
- 1Have a workshop with diagnostic equipment carry out a camshaft adaption. It should be done as the first action for camshaft-related faults.
- 2Read the code after the adaption. If it is still there, the adaption has not cured the fault and more causes must be checked.
- 3If the timing belt was recently replaced, tell the workshop, as the camshaft setting is the first thing to check.
- 4If the fault remains, have a workshop check that the exhaust camshaft is correctly fitted and undamaged.
Symptome, die Sie bemerken können2
- The Check engine (malfunction) lamp comes on or behaves abnormally
- The engine does not start, and when the fault shows is unclear
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.