Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P140200
    VOLVO

    ECM-P140200 - Exhaust Gas Recirculation Metering Orifice Restricted. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S80 (2007–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo S80 (2007–)2010–2011Nur Motor: D4164T
    • Volvo V70 (2008–)2010–2011Nur Motor: D4164T

    Was bedeutet der Fehlercode?

    The engine control module (ECM) monitors the EGR control, that is the exhaust gas recirculation. The code is set when the module registers a fault in the EGR valve or its wiring that gives incorrect EGR control. The fault can come from poor contact, a short or open circuit in the wiring, a sticking EGR valve, or a damaged EGR valve.

    Mögliche Ursachen

    • Poor contact, contact resistance or oxidation at the EGR valve connectors
    • Short circuit to supply voltage in the wiring to the EGR valve
    • Short circuit to earth in the wiring to the EGR valve
    • Open circuit in the wiring to the EGR valve
    • The EGR valve seizes or has jammed
    • Damaged EGR valve

    Was Sie tun können

    1. 1Check that the fuses are intact. The locations are in the owner's manual or on the fuse box cover.
    2. 2Check the connectors to the EGR valve. They should be secure and free from oxide.
    3. 3Look for broken, chafed or pinched wires to the EGR valve. They may have shorted to earth or supply voltage.
    4. 4Look for soot and dirt around the EGR valve, as it can seize or jam.
    5. 5Have a workshop with diagnostic equipment check the EGR valve and its wiring, and replace the valve if it is damaged.

    Symptome, die Sie bemerken können1

    • No noticeable symptoms for the driver

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.