Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P141200
    VOLVO

    ECM-P141200 - Exhaust Gas Recirculation Valve Frozen. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (8)
    • Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
    • Volvo S80 (2007–)2010–2011Nur Motor: D4164T
    • Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
    • Volvo V70 (2008–)2010–2011Nur Motor: D4164T
    • Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
    • Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
    • Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5

    Was bedeutet der Fehlercode?

    The engine control module (ECM) monitors the position sensor of the EGR valve and sets the code when the valve does not move to the position the module has requested. The causes are a sticking or damaged EGR valve, poor contact, dirt or soot, or an open or short circuit in the wiring to the valve. The exhaust gas recirculation (EGR) control is switched off.

    Mögliche Ursachen

    • Sticking EGR valve
    • Damaged EGR valve
    • Poor contact, contact resistance or oxidation at the EGR valve connectors
    • The EGR valve seizes from dirt or soot
    • Open circuit in the wiring to the EGR valve
    • Wiring to the EGR valve shorted to earth or supply voltage

    Was Sie tun können

    1. 1Check that the fuses are intact.
    2. 2Go through the connectors to the EGR valve. They should be secure and free from oxide.
    3. 3Look for breaks in the wiring to the EGR valve, and for chafing that may have shorted it to earth or supply voltage.
    4. 4If you have a diagnostic tool, you can activate the EGR valve and check that it does not bind.
    5. 5Have a workshop measure at the connector to the engine control module, as this needs measurements.

    Symptome, die Sie bemerken können1

    • The Check engine (malfunction) lamp comes on or behaves abnormally

    Was der Fehler beeinflussen kann2

    • EGR control is switched off
    • Engine output is limited

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.