Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P147412
    VOLVO

    ECM-P147412 - Fan Control Primary Circuit. General Electrical Failures. Circuit short to battery

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    4 Modelle

    V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
    • Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
    • Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
    • Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5

    Was bedeutet der Fehlercode?

    The engine control module (ECM) controls the cooling fan with a PWM signal through the fan control unit. The fault was detected in the engine control module and concerns the signal wire between the two control units, which is shorted to voltage.

    Mögliche Ursachen

    • The signal wire between the engine control module (ECM) and the fan control unit is shorted to voltage
    • Damaged fan control unit
    • Damaged engine control module (ECM)

    Was Sie tun können

    1. 1Check that the fuses are intact. Their location is in the owner's manual or on the fuse box cover.
    2. 2Check the connectors between the engine control module and the fan control unit for looseness, contact resistance and corrosion.
    3. 3With the ignition off, use a multimeter to check that the signal wire has no contact with voltage (positive).
    4. 4Check that the signal wire is not chafed or pinched.
    5. 5If you have a diagnostic tool, activate the cooling fan and check that it starts and stops when you send the command.
    6. 6If the code returns, have a workshop check the fan control unit and the engine control module.

    Symptome, die Sie bemerken können1

    • The engine runs hot or overheats

    Was der Fehler beeinflussen kann1

    • The cooling fan is active

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.