VOLVO
ECM-P157000 - Intake Manifold Runner Control Circuit High. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The swirl flap motor operates the flaps in the intake manifold, and its signal is monitored by the engine control module (ECM). The code is set when the PWM signal is wrong, and it is checked with the engine running.
Mögliche Ursachen
- Signal wire shorted to voltage
- Fault in the swirl flap motor
Was Sie tun können
- 1Check that the fuses are intact. Their location is in the owner's manual or on the fuse box cover.
- 2With the ignition off, disconnect the connector to the swirl flap motor and use a multimeter to check that the signal wire is not shorted to voltage.
- 3Check the connector to the swirl flap motor for looseness and corrosion.
- 4If you have a diagnostic tool, activate the swirl flap motor and check that it responds to the command.
- 5If the fault remains, have a workshop check the swirl flap motor.
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.