VOLVO
ECM-P158500 - Throttle Control Malfunction. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The engine control module (ECM) calculates the engine torque in two ways from signals from the air mass meter, the throttle body and the intake pressure sensor, and compares the results. The code is set when the two calculations differ too much.
Mögliche Ursachen
- Air leak in the intake pipe, after the air mass meter and the throttle body
- Damaged throttle body
- Damaged engine temperature sensor
- Damaged flywheel sensor
- Damaged intake pipe pressure sensor
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check that the fuses are intact. Their location is in the owner's manual or on the fuse box cover.
- 2Check that the hoses in the intake system after the air mass meter and the throttle body are not cracked or loose, as a leak causes faults.
- 3Check the connectors to the throttle body and the pressure sensor for looseness, contact resistance and corrosion.
- 4If you have a diagnostic tool, read the airflow and intake pipe pressure in live data during a test drive, and check that the values agree with each other.
- 5If the fault remains, have a workshop check the throttle body and the sensors.
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- Engine torque is limited, and the highest permitted level depends on the accelerator pedal position
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.