Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P158872
    VOLVO

    ECM-P158872 - Throttle Control Detected Loss Of Return Spring. Mechanical Failures. Actuator stuck open

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    7 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Modelle nach Baujahr und Motor anzeigen (20)
    • Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
    • Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
    • Volvo S80 (2007–)2010Nur Motor: B4204T6
    • Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
    • Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
    • Volvo S80 (2007–)2015Nur Motor: B4164T
    • Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
    • Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
    • Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
    • Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
    • Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
    • Volvo V70 (2008–)2010Nur Motor: B4204T6
    • Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
    • Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
    • Volvo XC60 (2009–)2010Nur Motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7

    Was bedeutet der Fehlercode?

    The engine control module (ECM) sets the code when, during an adaptation attempt, it detects that the throttle movement is blocked or that the return spring does not work correctly. Although the code is named as stuck in the open position, the condition covers the movement and the return spring function.

    Mögliche Ursachen

    • The throttle sticks or is blocked, for example by oil film or dust
    • Contact resistance or corrosion at the throttle body connector to the ECM
    • Open circuit or short to ground or voltage in the wires to the throttle motor
    • The wires to the throttle motor are shorted to each other
    • Damaged throttle body

    Was Sie tun können

    1. 1Check that nothing is blocking the throttle and that it cannot stick in one position.
    2. 2Have a workshop clean the throttle body if needed.
    3. 3With the ignition off, check the connectors at the throttle body and the engine control module for looseness, contact resistance and corrosion.
    4. 4With the ignition off, use a multimeter to check that the throttle motor wires have no break and no contact with ground or voltage.
    5. 5If the code returns, it points to a damaged throttle body, which a workshop can replace.

    Symptome, die Sie bemerken können3

    • The engine lacks power or performs poorly
    • The check engine lamp lights or behaves abnormally
    • A text message is shown in the display

    Was der Fehler beeinflussen kann1

    • Depending on the nature of the fault, the power to the throttle motor may be switched off, so the throttle goes to its spring-return position

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.