VOLVO
ECM-P158900 - Throttle Control Unable To Control To Desired Throttle Angle. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (19)
- Volvo S60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo S60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Nur Motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Nur Motor: B6304T2
- Volvo S80 (2007–)2011–2015Nur Motor: B6304T4
- Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo V60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Nur Motor: B6304T2
- Volvo V70 (2008–)2011–2015Nur Motor: B6304T4
- Volvo XC60 (2009–)2009–2010Nur Motor: B6304T2
- Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Nur Motor: B6304T2
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4
- Volvo XC90 (2003–)2005–2006, 2011Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
Was bedeutet der Fehlercode?
The engine control module (ECM) controls the throttle and checks that the measured position follows the control. The code is set when the measured throttle position value does not change even though control is applied. This may be caused by the throttle sticking, an incorrect adaptation, or a damaged throttle body or engine control module.
Mögliche Ursachen
- The throttle sticks or is blocked, for example by oil film, dust or ice
- Incorrectly adapted throttle body
- Damaged throttle body
- Damaged engine control module (ECM)
Was Sie tun können
- 1With the ignition on, read the throttle position in live data and check that the value changes when the accelerator pedal is pressed.
- 2With the ignition off, press the throttle plate gently and check that it does not stick or is not blocked by anything.
- 3Have a workshop clean the throttle body if needed.
- 4Have a workshop redo the throttle adaptation (calibration), since it may be incorrect.
- 5If the fault remains, have a workshop check the throttle body and the engine control module.
Symptome, die Sie bemerken können4
- A text message is shown in the display
- The engine performs poorly
- The idle speed is high
- The cruise control does not work at all
Was der Fehler beeinflussen kann2
- The power to the throttle body is switched off, so the throttle plate goes to its spring-return position
- The cruise control is switched off for as long as the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.