Was bedeutet der Fehlercode ECM-P159364?

Diagnose und Fehlercodedefinition für ECM-P159364 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P159364 - Cruise Control Monitor Fault. Algorithm Based Failures. Signal plausibility failure

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The ECM confirms that it holds the data the cruise control needs, including from the steering wheel buttons and the transmission control module (TCM). The code is set when any of it is missing, or when the information is unreasonable, for example during excessive acceleration from low speed.

Mögliche Ursachen

The cause may lie in the central electronics control module (CEM)
The cause may lie in the brake control module (BCM)
Short circuit between the CAN wires
Loose connections or contact resistance in the connections to the CAN network

Was Sie tun können

1Check that the cruise control buttons on the steering wheel work and that nothing is stuck in them.
2Check that the gear selector can be engaged in the correct position and that no transmission fault is shown.
3Read the fault codes in the central electronics control module (CEM) and the brake control module (BCM), and correct them first.
4Check the connections to the CAN network for loose contacts and contact resistance.
5Do not work on the braking system yourself. Have a workshop check the brake control module if it has fault codes.

Symptome, die Sie bemerken können1

The cruise control cannot be engaged

Was der Fehler beeinflussen kann1

The cruise control is switched off for as long as the fault is active

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.