VOLVO
ECM-P159368 - Cruise Control Monitor Fault. Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
Was bedeutet der Fehlercode?
The code is event controlled, so it is an information code that does not show a fault in the engine control module. It is set when information the cruise control needs is missing or unreasonable, for example during excessive acceleration from low speed, and it clears when the conditions no longer apply.
Mögliche Ursachen
- The code can be set without any fault needing correction
- The cause may lie in the central electronics control module (CEM)
- The cause may lie in the brake control module (BCM)
- Short circuit between the CAN wires
- Loose connections or contact resistance in the connections to the CAN network
Was Sie tun können
- 1Clear the fault code and check whether it returns after you have used the cruise control for a while.
- 2If the code returns, read the fault codes in the brake control module (BCM) and the central electronics control module (CEM), and correct them first.
- 3Do not work on the braking system yourself. Have a workshop check the brake control module if it has fault codes.
- 4If the fault remains, have a workshop check the CAN network.
Symptome, die Sie bemerken können1
- The cruise control cannot be engaged
Was der Fehler beeinflussen kann1
- The cruise control is switched off for as long as the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.