VOLVO
ECM-P160801 - Watchdog Malfunction. General Failure Information. General electrical failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
Was bedeutet der Fehlercode?
The engine control module (ECM) has restarted because of an informational code, which is event-driven. It does not show a fault in the control module where it is active. The engine control module monitors the signals from the control modules it communicates with, and once the code is registered it restarts.
Mögliche Ursachen
- The engine control module (ECM) has restarted
Was Sie tun können
- 1No specific troubleshooting exists for this code. It is an informational code
- 2Read off the fault codes and note whether any other codes are stored
- 3Check whether the cabin light and instrument lighting work as normal on the next drive
- 4If the fault code returns together with other faults: have a workshop read off the faults and assess them
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The cabin light may flicker and the instrument lighting may go out briefly
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.