VOLVO
ECM-P160888 - Watchdog Malfunction. Bus Signal / Message Failures. Bus off
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module (ECM) has registered that its internal communication is incorrect. The code states bus off, which means the control module has temporarily stopped taking part in CAN communication.
Mögliche Ursachen
- Communication interference
- Damaged engine control module (ECM)
Was Sie tun können
- 1Read off the fault codes and note which are present before clearing any
- 2Clear the fault code, switch the ignition on and wait a while so the control module can run its test
- 3Check that the fault code is no longer active when the test has finished. If it is gone, the fault may have been temporary
- 4If the fault code returns: have a workshop replace the engine control module (ECM)
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.