VOLVO
ECM-P160911 - Diagnostic Lamp Driver. General Electrical Failures. Circuit short to ground
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (1)
Was bedeutet der Fehlercode?
The engine control module (ECM) controls the general warning lamp over the CAN bus to the driver information module (DIM). The code is set when the engine control module detects a fault on the signal that controls the warning lamp. Fault-tracing is primarily carried out in the driver information module.
Mögliche Ursachen
- Fault in the driver information module (DIM)
Was Sie tun können
- 1Check that the fuses are intact. Their locations are given in the owner's manual
- 2Check with buttons or controls in the car whether the functions that are normally controlled work as they should
- 3Use a multimeter to check that the signal wire to the general warning lamp has no contact with earth (the body)
- 4Check that the connectors to the instrument cluster are firmly seated and free from corrosion
- 5If the fault code returns: have a workshop fault-trace the driver information module (DIM)
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The general warning lamp is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.