VOLVO
ECM-P160948 - Diagnostic Lamp Driver. System Internal Failures. Supervision software failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
Was bedeutet der Fehlercode?
The engine control module (ECM) has registered an internal reset. The code may be stored after new software has been downloaded to the engine control module, and then there is no fault in the control module. The code is set because of the internal reset condition.
Mögliche Ursachen
- The fault code may be stored after software has been downloaded
Was Sie tun können
- 1No specific troubleshooting exists for this code
- 2Read off the fault codes and note whether any other codes are stored
- 3If the code appeared after a software update of the engine control module, it may have been stored at that time. Have a workshop read off the code if you are unsure
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.