VOLVO
ECM-P161600 - Interactive Reprogramming Code - erase error, low voltage. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The engine control module (ECM) has registered that the voltage was too low while its internal processor was being reprogrammed. The fault therefore relates to a programming step, and the cause is given as a software fault. The engine may be difficult to start and may feel short of power.
Mögliche Ursachen
- Software fault in the engine control module (ECM)
Was Sie tun können
- 1Check the battery charge and that the battery terminals are tight and clean before any programming is done
- 2Read off the fault codes and note which are present
- 3Have a workshop reload the engine control module with the latest software and check that the fault code is gone
- 4After the reprogramming: switch the ignition on, start the engine and read off the fault codes again
Symptome, die Sie bemerken können2
- The engine is difficult to start
- The engine feels short of power
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.