VOLVO
ECM-P162917 - Internal Voltage Regulator. General Electrical Failures. Circuit voltage above threshold
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module (ECM) has detected that the voltage supply to its internal components is incorrect, here too high. The code therefore concerns the internal voltage regulator in the control module. The cause may be a fault in the charging system or a damaged engine control module.
Mögliche Ursachen
- Fault in the charging system
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check the battery charge and that the battery terminals are tight and clean
- 2Read off the fault codes and note which are present before clearing any
- 3Clear the fault code, switch the ignition on and wait a while so the control module can run its test
- 4Check that the fault code is no longer active when the test has finished. If it is gone, the fault may have been temporary
- 5If the fault code returns: have a workshop replace the engine control module (ECM)
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.