Was bedeutet der Fehlercode ECM-P163500?

Diagnose und Fehlercodedefinition für ECM-P163500 (Volvo C30 (2007–2013), Volvo S40 (2004–2013), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P163500 - Tire/Axle Out of Acceptable Range. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

9 Modelle

C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

Modelle nach Baujahr und Motor anzeigen (11)

Was bedeutet der Fehlercode?

The fault concerns configuration data for wheel size or axle ratio being incorrect. The engine control module gets this data from the central electronic module (CEM) and compares it with engine speed and vehicle speed signals while driving. The fault code may be caused by a control module from another car having been fitted.

Mögliche Ursachen

Programming fault. The cause may lie in the central electronic module (CEM)
Incorrect vehicle configuration: a second-hand control module with other software or hardware that is not intended for this car

Was Sie tun können

1Read off the fault codes and note which are present before clearing any
2Think about whether a control module has been replaced recently, for example a second-hand one from another car, as the fault code may be due to that
3Clear the fault code, drive the car and read off the fault codes again afterwards
4If the fault code remains: have a workshop load the correct software into the central electronic module (CEM)

Symptome, die Sie bemerken können2

The speedometer shows an incorrect value
A text message and a warning symbol appear in the display

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.