VOLVO
ECM-P164200 - CAN Link Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
The engine control module (ECM) has registered faults in the torque request from the brake control module (BCM), which is sent over the CAN link. The fault can lead to limited engine torque. The code is a general description and does not state what type of fault it is.
Mögliche Ursachen
- Faulty software
- Damaged engine control module (ECM)
Was Sie tun können
- 1Read off the fault codes, note which are present and clear the fault code
- 2Drive the car and read off the fault codes again afterwards. Check that the fault code is no longer active
- 3If the fault code returns: have a workshop check the software in the engine control module and replace the module if the fault remains
Symptome, die Sie bemerken können2
- A text message and a warning symbol appear in the display
- The engine performs poorly and lacks power while driving
Was der Fehler beeinflussen kann1
- Engine torque may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.