VOLVO
ECM-P164604 - Linear O2 Sensor Control Chip (Bank 1). General Failure Information. System Internal Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Nur Motor: B4164T
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Nur Motor: B4164T
- Volvo V70 (2008–)2012–2015Nur Motor: B4164T, B4164T2
Was bedeutet der Fehlercode?
The control module (ECM) has logged an internal fault in its lambda sensor control, bank 1. The fault concerns the control module's own part of the lambda control.
Mögliche Ursachen
- A damaged engine control module (ECM)
Was Sie tun können
- 1Read off the fault codes and note which are present
- 2Check that the connectors and wiring to the lambda sensors are firmly seated and not chafed
- 3Clear the fault code, switch the ignition on and wait a while so the control module can run its test
- 4If the fault returns: have a workshop replace the engine control module (ECM)
Symptome, die Sie bemerken können1
- The check engine lamp lights or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.