VOLVO
ECM-P164608 - Linear O2 Sensor Control Chip (Bank 1). General Failure Information. Bus Signal / Message Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Nur Motor: B4164T
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Nur Motor: B4164T
- Volvo V70 (2008–)2012–2015Nur Motor: B4164T, B4164T2
Was bedeutet der Fehlercode?
The control module (ECM) has logged an internal fault in its lambda sensor control, bank 1. Although the code is described as a bus or message fault, the condition concerns the control module's own function.
Mögliche Ursachen
- A damaged engine control module (ECM)
Was Sie tun können
- 1Inspect the wiring and connectors to the lambda sensors for damage and loose connections
- 2Read off the fault codes and note which are present before clearing any
- 3If the fault returns after the code has been cleared: have a workshop replace the engine control module (ECM)
Symptome, die Sie bemerken können1
- The check engine lamp lights or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.