VOLVO
ECM-P165600 - CAN Link PCM/PCM Circuit/Network. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The vehicle's control modules communicate over the CAN network, and the engine control module (ECM) has detected disturbances on it. This is a general CAN link fault with no more detailed description of the fault type. When there is a communication fault in the system, other control modules may find it difficult to reach the engine control module.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- Break in one of the CAN wires
- Short circuit between the CAN wires
- A control module on the same part of the CAN network has an internal fault
Was Sie tun können
- 1Read off the fault codes and troubleshoot the codes that are present first, as they may show which part of the CAN network is disturbed
- 2Check that the connectors in the CAN network are firmly seated and free from oxide
- 3Use a multimeter to check that the CAN wires are not broken or short-circuited to each other
- 4If the fault code returns: have a workshop check whether another control module on the CAN network is faulty
Symptome, die Sie bemerken können1
- A text message and a warning symbol appear in the display
Was der Fehler beeinflussen kann2
- The engine control module shuts itself off in bus-off mode and stays off until the power is cut and then reconnected
- When the power is reconnected, the engine control module makes new attempts to communicate
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.