VOLVO
ECM-P167500 - Injector data not programmed. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module (ECM) must have calibration values for the injectors programmed so that they match the injectors' classification. The fault code is set when the control module detects a fault in the fuel quantity adjustment, meaning the IMA programming of the injectors.
Mögliche Ursachen
- IMA programming that failed or was interrupted
Was Sie tun können
- 1Read off the fault codes and note which are present
- 2If any programming of the engine control module has been interrupted or has not succeeded, that may be the cause of the fault code
- 3Have a workshop repeat the programming of the injector data in the engine control module
Symptome, die Sie bemerken können3
- The engine performs poorly and lacks power, especially when pulling away from standstill
- The engine hesitates, surges or runs unevenly while driving
- A text message and a warning symbol appear in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.