VOLVO
ECM-P167504 - Injector data not programmed. General Failure Information. System Internal Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the data that each injector stores in its memory circuit. The data is sent over the LIN bus, and the fault code is set when communication between the engine control module and the injector is missing.
Mögliche Ursachen
- LIN communication between the injector and the engine control module is not working
- Internal fault in the injector
Was Sie tun können
- 1Read off the fault codes and note which are present before clearing any
- 2Check that the connectors to the injectors are firmly seated and clean
- 3Have a diagnostic tool: read the injector data in live data with the engine running and see whether the values update
- 4Clear the fault code, start the engine and let it run for a while so the control module can run its test
- 5If the fault code returns: have a workshop check the injector and the LIN communication to it
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The engine control module uses the last known value from the injector
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.