VOLVO
ECM-P167506 - Injector data not programmed. General Failure Information. Algorithm Based Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The injector data should be available to the engine control module, but the fault code is set when the control module can no longer read it over the LIN bus. The fault therefore concerns communication with the injectors and not the fuel itself.
Mögliche Ursachen
- LIN communication between the injector and the control module is not working
- Internal fault in the injector
Was Sie tun können
- 1Read off the fault codes and note whether any other codes are stored
- 2Check that the connectors to the injectors are firmly seated and clean
- 3If the fault code returns: have a workshop check the injector and the LIN wiring to it
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The control module uses the most recently used value from the injector
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.