VOLVO
ECM-P16894B - Oil Pressure Control Solenoid Circuit. General Electrical Failures. Over temperature
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (23)
- Volvo S60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D5204T6
- Volvo V60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Was bedeutet der Fehlercode?
The output stage of the engine control module, which controls the piston cooling valve, has become too hot. Other fault codes are probably stored as well and should be troubleshot first.
Mögliche Ursachen
- The output stage in the engine control module (ECM) has become too hot
- Overload in the connected components that the fault code concerns
- Play in connectors
Was Sie tun können
- 1Read off the fault codes and troubleshoot any others that are present first
- 2Check that the connectors to the control module and the piston cooling valve are firmly seated and have no play
- 3Check that the piston cooling valve is not sticking or damaged, since overload in the connected components can cause the fault
- 4If nothing is found, the fault may lie inside the output stage of the control module. Then have a workshop replace the engine control module
Symptome, die Sie bemerken können1
- A yellow warning symbol and a text message appear in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.