VOLVO
ECM-P170300 - Brake Switch Out Of Self Test Range. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The fault is due to driver error: the brake pedal was pressed when the engine control module (ECM) carried out its self-test at ignition, or when it tested the brake pedal sensor at engine start. The code gives no further detail on the type of fault.
Mögliche Ursachen
- Driver error, with the brake applied during the engine control module self-test
Was Sie tun können
- 1Switch the ignition off, fully release the brake pedal and switch the ignition on again without pressing the brake
- 2Clear the fault code and read off the fault codes again after a short drive
- 3Check that the connectors at the brake pedal sensor are firmly seated and free from oxide
- 4Do not work on the brake system yourself. If the fault code returns: have a workshop check the brake pedal sensor
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.