Was bedeutet der Fehlercode ECM-P170E00?

Diagnose und Fehlercodedefinition für ECM-P170E00 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P170E00 - Clutch Delivered Torque Performance. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

12 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (40)

Was bedeutet der Fehlercode?

The engine control module (ECM) compares the clutch pedal position from two sensors: a position sensor that reaches it via the central electronic module (CEM) and a position switch. The fault code is set when the pedal is pressed but the clutch does not open. The fault code does not indicate damage to the clutch pedal switches.

Mögliche Ursachen

Mechanically damaged clutch
Damaged clutch hydraulics
Air in the hydraulic system
Leak in the hydraulic system
Damaged slave cylinder

Was Sie tun können

1Check the hydraulic fluid level in the clutch reservoir and look for leaks
2Press the clutch pedal a few times and feel whether it becomes spongy, heavy or stiff
3If you suspect air in the clutch hydraulics: have a workshop bleed the system
4If the fault code returns: have a workshop check the clutch and the slave cylinder

Symptome, die Sie bemerken können5

The clutch grabs, slips or jerks
Hydraulic fluid leaks from the clutch
The clutch pedal squeaks
The clutch pedal has an engagement point that is too high or too low
The clutch pedal feels heavy or stiff

Was der Fehler beeinflussen kann1

The engine may shut off

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.