VOLVO
ECM-P193400 - Vehicle Speed Signal. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (41)
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D4204T5
- Volvo S60 (2011–)2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Nur Motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Nur Motor: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Nur Motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo S80 (2007–)2015Nur Motor: B6304T4, B6324S4, B6324S5, D4204T5
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, B4204T11, D4162T, D5204T6
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Nur Motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Nur Motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Nur Motor: B5204T9, B6304T4, B6324S5, D4204T5
- Volvo V70 (2008–)2015Nur Motor: B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2009Nur Motor: B6304T2
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC60 (2009–)2015Nur Motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The brake control module (BCM) monitors the signal from the vehicle speed sensor and informs the engine control module (ECM) over the CAN network when something is wrong. The code is stored in both the BCM and the ECM. The fault can only be detected with the engine running, and the code is set once the test conditions are met.
Mögliche Ursachen
- Fault in the brake control module (BCM), where the code is stored first
- Fault in the signal from the vehicle speed sensor to the brake control module
Was Sie tun können
- 1Read off the codes in the brake control module (BCM) first and remedy them, as the code in the engine control module follows from that fault
- 2Clear the code in the engine control module only once the code in the brake control module has been cleared
- 3Check that the connectors to the brake control module are secure and free from corrosion
- 4If you have a diagnostic tool: compare the speed value in the brake control module's live data with the speedometer during a test drive and check that they follow each other
- 5If the code returns after the fault is remedied, have a workshop with diagnostic equipment investigate further
Symptome, die Sie bemerken können3
- Malfunction indicator light (MIL) on
- Cruise control does not work and cannot be engaged
- Check engine warning lamp lights or behaves abnormally
Was der Fehler beeinflussen kann3
- Cruise control is switched off
- On cars with automatic transmission, the transmission control module (TCM) supplies the speed value instead
- On cars with manual transmission, the brake control module's speed value is replaced by a default value
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.