VOLVO
ECM-P193A00 - Invalid Scan Tool Communication/Request. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2008–2010Nur Motor: D4204T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2008–2010Nur Motor: D4204T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
The engine control module (ECM) continuously checks its own components and functions and has registered an internal fault. Although the code is named invalid scan tool communication or request, it applies to that internal fault in the engine control module.
Mögliche Ursachen
- Damaged engine control module (ECM)
Was Sie tun können
- 1Clear the code and run the engine for a while to see whether it returns
- 2If you have a diagnostic tool: read the status of the code after the control module's internal test has been run with the engine running
- 3Have a workshop load the latest software into the engine control module
- 4If the code returns after this, the engine control module should be replaced, which a workshop does
Symptome, die Sie bemerken können2
- Warning symbol and text message shown in the driver information display
- The car runs with poor performance and lacks power
Was der Fehler beeinflussen kann1
- Engine output and speed are limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.