VOLVO
ECM-P200900 - Intake Manifold Runner Control Circuit Low (Bank 1). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The engine control module (ECM) checks how the swirl damper motor works. The code is set when the signal from the learned closed end position of the swirl damper motor is incorrect. The test is only run after a drive, once its conditions are met.
Mögliche Ursachen
- Defective swirl damper motor
- Swirl damper jams or has stuck
- Damaged swirl damper arm
- Damaged swirl damper end stop
Was Sie tun können
- 1Check that the swirl damper is not jammed or stuck in its end position
- 2Check that the swirl damper arm and end stop are not damaged
- 3If you have a diagnostic tool: read the status of the code after a drive to see whether it is active
- 4If the fault remains, have a workshop check the swirl damper motor and carry out a new learning of the end position
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.