VOLVO
ECM-P200977 - Intake Manifold Runner Control Circuit Low (Bank 1). Mechanical Failures. Commanded position not reachable
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The engine control module (ECM) checks how the swirl damper motor works. Although the code is named commanded position not reachable, it applies when the learning of the swirl damper motor's closed end position has failed. The code is only tested after a drive, once the test conditions are met.
Mögliche Ursachen
- Defective swirl damper motor
- The swirl damper is jammed or has stuck
Was Sie tun können
- 1Check that the swirl damper can move freely and has not stuck in its end position
- 2After a drive, use a diagnostic tool, if you have one, to check whether the code is active
- 3Check that the connectors to the swirl damper motor are secure and free from oxidation
- 4If the fault remains, have a workshop check the swirl damper motor and carry out a new learning of the closed end position
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.