VOLVO
ECM-P200A00 - Intake Manifold Runner Performance - Bank 1. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The engine control module (ECM) compares the swirl damper position with a calculated value and sets the code when the position is wrong. The code therefore concerns the position of the swirl damper itself, and it is tested with the engine running.
Mögliche Ursachen
- Damaged swirl throttle motor
Was Sie tun können
- 1If you have a diagnostic tool: compare the swirl damper position in live data with the engine running, and check that it follows the command
- 2Check that the swirl damper and its linkage can move freely
- 3Check that the connectors to the swirl damper motor are secure and free from oxidation
- 4If the fault remains, have a workshop with diagnostic equipment check the swirl damper motor
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.