VOLVO
ECM-P200A84 - Intake Manifold Runner Performance - Bank 1. Bus Signal / Message Failures. Signal below allowable range
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
Although the code is named signal below allowable range, it applies when the swirl damper position is wrong compared with the calculated position. The engine control module (ECM) makes the comparison and sets the code when the position deviates, which happens with the engine running.
Mögliche Ursachen
- Trouble code ECM-P200A85 can cause this code
- Linkage or swirl damper sticking
- Damaged linkage between the swirl throttle motor and the swirl duct
- Swirl throttle motor sticking
Was Sie tun können
- 1Check that the arm joining the swirl motor to the swirl duct has not come loose
- 2Check that the linkage and the swirl duct are not jammed or damaged
- 3Check that the swirl throttle motor is not jammed or damaged
- 4Clear the code once the fault is remedied, then check whether it comes back
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.