VOLVO
ECM-P201000 - Intake Manifold Runner Control Circuit High (Bank 1). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The ECM follows the swirl damper motor. Although the code is named circuit high, it applies to the signal from the learning of the swirl damper motor's open end position, which is incorrect. The fault can only be detected once the test has started and a drive has been made.
Mögliche Ursachen
- The swirl damper jams or has stuck
- Defective swirl damper motor
- Damaged swirl damper arm
- The end stop for the swirl damper is damaged
Was Sie tun können
- 1Check that the swirl damper moves freely and is not jammed
- 2Look over the swirl damper arm and end stop for damage and loose parts
- 3If you have a diagnostic tool: activate the swirl damper motor and see whether it reaches its open end position
- 4If the fault remains, have a workshop check the swirl damper motor and carry out a new learning of the open end position
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.