VOLVO
ECM-P201077 - Intake Manifold Runner Control Circuit High (Bank 1). Mechanical Failures. Commanded position not reachable
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The engine control module (ECM) checks the swirl damper motor and whether it can reach its open end position. The code is set when the learning of the open end position has failed, and it is tested after a drive.
Mögliche Ursachen
- Defective swirl damper motor
- The swirl damper jams or has stuck
Was Sie tun können
- 1Check that the swirl damper is not jammed or stuck in the open position
- 2If you have a diagnostic tool, you can read whether the code is active after a drive
- 3Make sure the connectors at the swirl damper motor are intact and free from corrosion
- 4If the fault remains, have a workshop with diagnostic equipment check the swirl damper motor and the end position
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.