VOLVO
ECM-P201312 - Intake Manifold Runner Control Circuit High (Bank 2). General Electrical Failures. Circuit short to battery
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The code relates to a short circuit to supply voltage on the signal cable to the bank 2 swirl damper motor. The engine control module monitors the signal and sets the code when it is incorrect, which may happen when the cable is in contact with battery voltage.
Mögliche Ursachen
- Signal cable short-circuited to supply voltage
- Open circuit in the signal cable
- Damaged swirl throttle motor
- Swirl damper motor sticking
- Linkage or swirl damper sticking
- Trouble code ECM-P201211 can cause this code
Was Sie tun können
- 1Check that the fuses are intact
- 2If you have a diagnostic tool, read the status of the code with the ignition on and see whether it returns
- 3Use a multimeter to check that the signal cable has no contact with voltage
- 4Check that the cable is not pinched or chafed
- 5If the fault remains, have a workshop check the swirl damper motor and its signal cable
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.