VOLVO
ECM-P201561 - Intake Manifold Runner Position Sensor/Switch Circuit Range/Perf. (Bank 1). Algorithm Based Failures. Signal calculation failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The code concerns an incorrect calculation made during the adaptation of the swirl damper position. The engine control module sets it when that adaptation is judged wrong, and the test is made with the engine switched off.
Mögliche Ursachen
- Linkage or swirl damper sticking
- Damaged linkage between the swirl throttle motor and the swirl duct
- Swirl throttle motor sticking
Was Sie tun können
- 1Check whether the link arm to the swirl duct has come loose
- 2Check that the swirl damper linkage and swirl duct are not sticking or damaged
- 3Check that the swirl throttle motor is not sticking or damaged
- 4Clear the code only once the mechanics have been checked, then see whether it comes back
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.