VOLVO
ECM-P201900 - Intake Manifold Runner Position Sensor/Switch Circuit (Bank 2). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The ECM checks whether the swirl throttle has reached its end positions. The code is set when that check fails, and the test is made with the engine switched off.
Mögliche Ursachen
- Control arm has come loose from the swirl damper motor or the swirl damper duct
- Damaged linkage between the swirl throttle motor and the swirl throttle duct
Was Sie tun können
- 1Check that the link arm to the swirl duct is still attached to the swirl damper motor
- 2Look for damage to the linkage between the swirl damper motor and the swirl duct
- 3Make sure the swirl damper motor moves easily and is not damaged
- 4Clear the code only once the linkage has been checked and remedied
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.