VOLVO
ECM-P208062 - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 1. Algorithm Based Failures. Signal compare failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The ECM watches exhaust system temperature and sets the code when the signal from the sensor is wrong, meaning the value it reports does not match what the ECM expects. The cause is either in the wiring or in the sensor itself.
Mögliche Ursachen
- Contact resistance or oxidation in the connectors
- Open circuit in the signal wire
- Damaged temperature sensor at the catalytic converter
Was Sie tun können
- 1Check that the fuses are intact
- 2Use a multimeter to check that the sensor wiring has no open circuit
- 3Look for contact resistance or oxidation in the sensor's connector
- 4If you have a diagnostic tool: see in live data whether the sensor value follows the engine warming up
- 5If the fault remains, have a workshop measure the sensor resistance and repair the wiring as needed
Symptome, die Sie bemerken können2
- The car runs with poor performance and lacks power
- The engine hesitates, surges or runs unevenly, especially during acceleration
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.