VOLVO
ECM-P210041 - Throttle Actuator Control Motor Circuit /Open. System Internal Failures. General checksum failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module has found an internal checksum error in the control of the throttle motor. It is classed as an internal system fault and is checked with the ignition on. The code shows that something in the control does not match, but it does not point to one particular part.
Mögliche Ursachen
- Contact resistance or oxidation in the connectors
Was Sie tun können
- 1Check that the fuses are intact
- 2Read the code with the ignition on and see whether it is still active
- 3Check the connectors at the throttle unit and at the engine control module for loose connections and oxidation
- 4After any work, read the code again to confirm that it has cleared
- 5If the fault remains, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.