VOLVO
ECM-P210113 - Throttle Actuator Control Motor Circuit Range/Performance. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
Although the code is named open circuit, it concerns the PWM (pulse-width modulated) control signal to the throttle motor. It can also be set when the throttle output stage inside the engine control module becomes too hot.
Mögliche Ursachen
- Loose contacts, raised contact resistance or oxidised connections
- An open circuit in the signal wire
- Damaged throttle unit
Was Sie tun können
- 1Check that the fuses are intact
- 2Read the code with the ignition on and see whether it is still active
- 3Check the connectors at the throttle unit and the engine control module for looseness, contact resistance and oxidation
- 4Look for breaks and damage on the signal wire to the throttle unit, and use a multimeter to confirm it is not broken
- 5If the fault remains, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Symptome, die Sie bemerken können1
- Poorer engine performance
Was der Fehler beeinflussen kann1
- Engine torque may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.