VOLVO
ECM-P210796 - Throttle / Pedal Position Sensor A Minimum Stop Performance. Component Failures. Component internal failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
Although the code is named throttle and pedal position sensor, it concerns the circuit to the throttle unit motor. The engine control module has registered an internal fault, or a fault in that circuit, and the fault is a component failure. It may come from connectors, wiring, the throttle unit or the engine control module.
Mögliche Ursachen
- Contact resistance or oxidation in the connections between the control module and the throttle unit
- An open circuit, or a short to ground or supply voltage, in the wiring to the throttle motor
- The wires to the throttle motor have shorted together
- Damaged throttle unit
- Damaged engine control module
Was Sie tun können
- 1Check that the fuses are intact
- 2Read the code while the engine is running and note it down
- 3Check the connectors at the throttle unit and the engine control module for contact resistance and oxidation
- 4Look for breaks and chafing in the wiring to the throttle unit, and use a multimeter to confirm it is not connected to ground or supply voltage
- 5If you have a diagnostic tool, read the throttle position in live data and check that it follows the accelerator pedal
- 6If the fault remains, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Symptome, die Sie bemerken können2
- The engine lacks power and performs poorly
- Uneven idle
Was der Fehler beeinflussen kann1
- The engine control module cuts the supply to the throttle motor, so the throttle returns to its spring-loaded position
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.