Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P210884
    VOLVO

    ECM-P210884 - Throttle Actuator Control Module Performance. Bus Signal / Message Failures. Signal below allowable range

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    7 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Modelle nach Baujahr und Motor anzeigen (20)
    • Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
    • Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
    • Volvo S80 (2007–)2010Nur Motor: B4204T6
    • Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
    • Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
    • Volvo S80 (2007–)2015Nur Motor: B4164T
    • Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
    • Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
    • Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
    • Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
    • Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
    • Volvo V70 (2008–)2010Nur Motor: B4204T6
    • Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
    • Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
    • Volvo XC60 (2009–)2010Nur Motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7

    Was bedeutet der Fehlercode?

    The code means that the engine control module's internal governor for throttle angle is damaged, or that its control signal falls below the permitted range while the throttle is being controlled. It can be checked while the engine is running.

    Mögliche Ursachen

    • Poor contact or oxidation between the control module and the throttle unit
    • The throttle sticks or is clogged with oil film or dust
    • An open circuit, or a short to ground or supply voltage, in the throttle motor wiring
    • The throttle motor wires have shorted to each other
    • Damaged throttle unit
    • Faulty software in the engine control module

    Was Sie tun können

    1. 1Check that the fuses are intact
    2. 2Read the code while the engine is running and note it down
    3. 3Check that the throttle is not blocked and moves freely when the accelerator is pressed
    4. 4With the ignition off, check the connectors at the throttle unit and the engine control module for looseness and oxidation
    5. 5Have a workshop carry out the throttle adaptation and, if needed, download new software to the engine control module
    6. 6If the fault remains, have a workshop with diagnostic equipment check the throttle motor wiring and the throttle unit

    Symptome, die Sie bemerken können2

    • The engine lacks power and performs poorly
    • The Check engine light comes on or behaves abnormally

    Was der Fehler beeinflussen kann2

    • The throttle returns to its spring-loaded position
    • Fuel supply may be shut off temporarily

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.